Product category
Decontamination pass boxes and VHP units, airtight and laminar flow pass boxes, bag-in bag-out housings, HEPA exhaust units, weighing booths, laminar flow hoods, isolators and stainless fittings for pharmaceutical and laboratory containment.
Documented families
Vaporized hydrogen peroxide equipment in three unit types: fumigation pass boxes for small items, decontamination transfer rooms for large loads, and generators that supply sterilant gas to isolators, pass boxes and small rooms.
Pass boxes that disinfect items with intense pulsed xenon ultraviolet light while transferring them between clean and non-clean areas, reaching a high kill rate within minutes instead of the roughly 30 minutes a conventional UV pass box needs.
Gas-tight pass boxes with mechanically compressed doors, electromagnetic interlock and optional glove port, used where samples must move between zones without any leakage of hazardous agents.
Pass-through chambers with a disinfectant basin, used in high-containment laboratories to move small acid- and alkali-resistant items through a liquid disinfection barrier between two rooms.
HEPA supply air outlets with a gel-seal channel that locks the filter frame against the housing knife edge for a leak-tight seal, in top-feed and side-feed versions with an optional regulating damper.
Negative-pressure booths for weighing powder materials: a fan pulls air through primary, medium-efficiency and HEPA stages over the work zone, containing the powder and protecting the operator and the room.
Rigid or flexible containment isolators that separate the work zone from the room with a physical barrier and controlled airflow: aseptic units for sterile operations, cell therapy units with integrated equipment, and negative-pressure units for potent or infectious products.
Mobile vertical-laminar-flow units (sampling carts) that bring a local HEPA-filtered clean zone to the sampling or transfer point for raw and auxiliary materials in pharmaceutical production.
Low-leakage airtight dampers for ventilation ducts in containment facilities, closing with a gas-tight seal so rooms can be isolated for decontamination and zero-leakage duty at a specified pressure difference.
Mist showers that remove active or toxic dust adhered to cleanroom garments with a fine water mist before personnel leave a controlled area, installed between clean and non-clean zones.
Forced full-body shower units installed between contaminated and semi-contaminated zones, where personnel and garments are decontaminated with a dosed disinfectant spray before leaving the controlled area.
Site furniture and fittings in 304 or 316 stainless steel for pharmaceutical plants and laboratories: work tables, trolleys, racks, sinks, wardrobes and shoe cabinets, made to the dimensions of the room.
Before you ask for a price
Request a quotation
A quotable request names the product family, the key specifications or the fact that they are still open, the quantity, the destination and who will install on site.
