Two-side air showers
Personnel air showers with HEPA-filtered air jetted from nozzles on two sides, used at cleanroom entrances to remove dust from clothing before entry; the buyer's contractor positions and connects the cabin on site.
Product category
Cleanroom equipment
Air showers and cargo showers, pass boxes, HEPA terminal housings, filter boxes, laminar flow benches and clean booths for general industrial cleanrooms.
Documented families
Families with supply scope, requirements and documents.
View supply scope and requirements
Three-side air showers
Personnel air showers that add top nozzles to the two side walls so filtered air blows from three directions, for entries where a more thorough dust removal is required; installed and connected by the buyer's contractor.
Rapid roll-door cargo showers
Cargo air showers with rapid roll-up doors for high-frequency goods transfer into cleanrooms; door speed, curtain colour and control mode are fixed per configuration, and the buyer's contractor handles positioning and power on site.
Sliding-door cargo showers
Cargo air showers with automatic sliding doors for logistics corridors serving semiconductor, pharmaceutical and food plants; door sensing and the shower cycle are automatic, and the buyer's contractor positions and connects the unit on site.
HEPA terminal housings
Terminal HEPA filter housings for cleanroom ceiling grids, in top-adjustable, replaceable-media and disposable integrated versions; the housing, filter class and ceiling interface are fixed per configuration, and duct connection is done by the installer.
Standard HEPA supply outlets
Standard HEPA supply outlets (terminal filter boxes with plenum and diffuser plate) for class 1000 to 100000 air-conditioning systems, sized by box, filter face, airflow and duct flange; installed in the ceiling by the buyer's contractor.
Fresh-air filter boxes
Fresh-air and exhaust filter cabinets for ventilation and make-up air: fresh-air cabinets, medium-efficiency exhaust boxes, activated-carbon adsorption boxes and multi-stage air filter boxes, sized by airflow and filter combination; connected to ductwork by the installer.
Chemical filter units
Fan-powered chemical filtration units with a sealed plenum and slide-out filter modules, configured per project with primary, medium, HEPA, activated-carbon or chemical filter stages; duct connection and commissioning are done by the installer.
Automatic roll filters
Automatic roll-type air filters for pre-filtration of ventilation and air-conditioning intakes, in standard, self-cleaning, explosion-proof and duct-type versions; the roll of media advances automatically on pressure-difference signal, and the frame size is fixed per configuration.
Horizontal laminar flow benches
Open horizontal laminar flow clean benches that wash the work zone with filtered air flowing from the rear towards the operator, for processes harmless to the operator; specified by work zone size and placed by the buyer.
Before you ask for a price
What buyers in this category confirm first.
- Door logic, opening sizes, electrical supply and the number of blowing sides fix an air shower; the buyer's contractor handles positioning, connection and commissioning.
- Pass boxes, terminal housings and benches are specified by clear dimensions, wall or ceiling interface and material; installation stays with the buyer.
Request a quotation
Send the configuration, quantity and destination.
A quotable request names the product family, the key specifications or the fact that they are still open, the quantity, the destination and who will install on site.